News

PP SPUNBOND NONWOVEN

PP SPUNBOND NONWOVEN

PP Spunbond Nonwoven

 
Spunbond nonwoven, Polyproplyene spunbond production technology enable us to produce spunbond fabrics from 10- 150 gram/m2 . Polyproplyene spunbond nonwoven is produced in the form of granulation of the raw material by melt extrusion method and filaments. The nature of the production of spunbond nonwoven fabric is based on the direct rotation of the continuous filaments of the polymeric granules and the subsequent nonwoven fabric being manufactured.
 
 
The basic qualities of the spunbond nonwoven product include:
 
Spunbond surface density range is approx. 10 - 150 g / m2
100% polypropylene spunbond nonwoven content
 
Equal distribution of fiber in the surface fabric, which determines approximately the characteristic characteristics. 2: 1 in longitudinal and transverse direction
High final strength of the fabric due to the high strength of continuous filaments (filaments)
 
Spunbond nonwoven, spunbond fabric
1.6 meter net width
12 - 150 g / m2 (0.35 to 4.5 oz / yd2) weight ranges,
100% polypropylene (PP) thermally produces sesame (non-woven) nonwoven materials.
 
Spunbond nonwoven, spunbond fabric products can be extended to the outside environment against UV rays and ultraviolet protection.
 
Spunbond non woven, spunbond fabric products can be given as absorbent or repellent. Absorbent spunbond fabrics are expected to be above the 2 seconds of absorbing liquid. Similarly, spunbond nonwoven products which are repellent are expected to be liquid resistant at least 60cmH2o2 column test. Absorbent or repellent spunbond nonwoven products are generally used in medical industrial products, disposable operating room covers, patient visitor fabrics, and doctor dresses.
 
Spunbond nonwoven products can produce burners as a burner. The switching of combustion is produced as DIN 4102, FMVSS 302, ISO 4589-1, EN 13984, EN 13859 and most importantly FR = Fire retardant, EN 13501-1 fire class B2.
 

 

The nature of the production of non-woven fabric by means of spunbond technology is based on the direct spinning of polymeric granulates into continuous filaments (filaments) and subsequently manufactured non-woven fabric. Thus the production of fibre characteristic for the other textile types and their subsequent conversion into the flat shape is excluded.
The basic qualities of this fabric include the following:
  • range of surface density approx. 10 - 150 g/m2
  • even distribution of fibre in the surface fabric determining the characteristic qualities that are approx. 2:1 in the longitudinal and transverse directions
  • high final strength of the fabric due to the high strength of continuous filaments (filaments)
  • characteristic fineness of the individual filaments can range from 1 to 5 den

 
20 August 2021

Be Informed

You can sign up for our newsletter to be informed
about innovations about Felix Nonwovens.